Truck Spray Booth 12m Side Draft

  • Truck Spray Booth 12m with side draft

Lead Time Order

Description

Truck Spray Booth 12m Side Draft

SB12 - Side Draft

ProductDescription
12*5*5m Semi-Down Draft Spray Booth40FT HQ Container
Inside Size12000mm x 5000mm x 4500mm (L x W x H)
Outside size12144mm x (5146mm+1450MM) x 5100mm (L x W x H)
Cabin Structure1. Cabin body is using steel framed structure.
2. Wall panel: Double panels δ =0.476mm with 70mm EPS
insulation.
3. Ceiling board: Double panels δ=0.476mm with 50mm rockwool
insulation;
4. Cabin frame is use galvanized steel sheet.
Ventilation FormSide draft.
Cover Materialδ-1.2mm galvanized steel plate, powered coated.
Main doorOne set electric rolling door, size (W×H): 4000×4300mm.
Main Door FormOne side in and out
QtyDoor opening size: 4000 × 4800mm (W×H), one set
Service door Structure1. 2 sets, size(W×H): 800×2000mm, with emergency lock which
will automatically open when the pressure inside is over-pressure.
Adopt stainless hinge.
2. The door sight glasses were rectangle.
QtyDoor leaf size: 800 × 2000mm (W×H)  QTY: total 2sets.
Side draft cabinMade of profile and steel plate, galvanized steel plate, intermediate rock-filled cotton insulation material, surface spraying treatment;
QtyTotal 2 set
Intake system CabinetVentilation cabin made by coating steel plate, inside cover
galvanized steel sheet, filled in rockwool.
Intake Fan Data2 sets Air intake unit.
One set including: 2*4kw YDW-4.5AL1 fan, Capacity 12,500m³/h,
with pre-filter.
Total is 2sets*2*4kw=16kw, intake air capacity: 50,000 m³/h.
QtyOne set 2×4KW
Intake Noise75-85db
Exhaust system CabinetVentilation cabin made by coating steel plate, inside cover
galvanized steel sheet, filled in rockwool.
Exhaust Fan Data2 sets Air extract unit.
One set including: 1*7.5kw 4-82-5.6E fan, motor outside, belt drive,
Capacity 21,297m³/h. With exhaust filter.
Total 2sets*1*7.5kw=15kw, exhaust air capacity: 42,594 m³/h.
QtyOne set 11KW.
Exhaust Noise75-85db
Light systemCeiling light: 14sets*4pcs=56pcs 18w LED lamp,
InstallationDouble sides 45°
Side Lightsbottom light: 16sets*2pcs=32pcs 18w LED lamp.
GlassLight equip 4.0mm temper glass
Light BoxStandard
Light DataIllumination≥800LUX;
Filter systemG3 primary filter, filter 10μm dust.
The high efficiency primary filter can capture granules larger than 10
μm, ceiling filter capture granules larger than 5μm, floor filter is M
type glassfiber filter. TSP≤1.4mg/m3, exhaust cabin have glassfiber
filter and activated carbon filtration.
Side Draft Filterglass fiber filters
Exhaust Airactive carbon filtration system
Duct MaterialExhaust duct use δ=0.8 galvanized sheet with die flange connection at both ends.
Duct QtyAir exhaust duct made up of good quality galvanized steel sheet
and flange made by profession equipment.
2. Total Straight duct: 8 meters high and 2 sets manual damper,
Elbow bend 2 PCS.
Heating system1. The heat converter is made of stainless steel material.
2. 2 sets Diesel burner. The burner is imported from Italy under the
brand name: RIELLO Model G20. Heating capacity: 180,000Kcal/h;
Total capacity: 36,000Kcal/h. The burner with pump.
3. The enclosure is made of steel frame work and electro-galvanized
sheets. The fans side seal panel with double layer plate (with heat
insulating cotton inside).
4. 2 sets pneumatic damper can automatically achieve from spraying to baking cycle.
5. Equipped with 50L oil tank per burner.
Burner2 set Italy Riello G20 diesel burner, capacity 180000Kcal/h.
Chimney4pcs straight chimney, 1pcs elbow
DamperPneumatic damper performs internal and external cycle conversion / Bellimo optional
Max Temp80℃
Control boxButton control.
Control FunctionsButton type, Lighting switch, spraying, risen-temperature spraying,
baking, baking temperature, time setting, failure indicator,
temperature controller, temperature limit controller, emergency
stop, breakdown alarm.
Voltage380V, 50HZ, 3P
Max Temp80℃
No=load air speed≥0.23m/s
Rated total power34KW
Colorwhite, blue, red or orange

Terms and Conditions

Terms and Conditions

Spray Booth
Terms & Conditions
Additional ducting will be for the buyers account
V.A.T.: The quoted price excludes Vat
Warranty: One Year
Training: Training on site is included. If Applicable.
Installation & Commissioning: Installation and Commissioning is included however the connection
of air hoses, water traps, electricity, roof sealing around the ducting, any extension of ducting and a forklift to offload, scaffolding And is for the clients account.
Scope of Work
Scope of Works Concerning the Supply & Installation of Spray Booth and Paint mixing Room
Customer Responsibilities
Fire Prevention/Safety
1. It is your responsibility as owner/user to ensure that all spray painting equipment purchased and installed in your work premises adheres to ALL fire rules, regulations and laws and By Laws etc. Fire rules, regulations and laws etc. differ from municipality to municipality, and it is your responsibility to ensure adherence thereto. Not with holding that we will offer assistance in acquiring approval from the council. You as the Buyer with the aid of Nutec needs to arrange procurement of all necessary authorization and planning permission associated with supply and erection of items quoted herein.
Before Installation: The Buyers responsibility
1. All arrangements connected with civil works to ensure smooth execution of installation, based on drawings supplied by us, if the latter is necessary.
2. Procurement of all necessary authorization and planning permission associated with supply and erection of items quoted herein.
3. Provision of energy supply and energy e.g. oil tank, Diesel Tank (if necessary, intermediate pumps) and supply lines of energy material to our connection points. i.e three phase electricity
4. Electrical supply to switching installation site.
5. Unloading ALL components from transportation at installation site or unless the seller has made prior arrangements with the installers.
6. Supply a forklift truck in able to offloads the products on arrival at the installation site.
7. Access around all plant at point of installation.
8. Room for access to, lying out of and erecting all ventilation and exhaust air.
9. Provision of a forklift for unloading, reloading, if necessary and material handling on site.
10. To ensure sufficient room around each item for installation (approximately 1 meter),
11. The completion of all civil works including pits, Flat floors, platforms etc.
12. Power installations
During Installation: The Buyers Responsibility
1. To ensure solid ground lm around all items for installation in order to set a mobile framework. More may be required if a platform and walkway is built.
2. Provision of 220 and 380 volt construction power for welding and installation equipment and to ensure that there is sufficient cable around each item for installation.
3. Hoisting equipment, Scissor lift (Roof) and scaffolding if needed.
4. Labour, to assist with installation if needed.
5. Power installations with connections to control cabinet and all other consuming devices, such as motors, burner, regulation devices and illumination.
6. Connection of oil and gas burners to supply mains.
7. Roof space for all ducting.
8. The provision of all ducting (Unless otherwise specified) in excess of 2 meters per exhaust from start of the ducting base of any equipment supplied by us. Additionally, the provision of any ducting that deviates, in any way, shape or form from straight
9. Outlet lines ducting for condensation from air heater and smoke/fume line (ducting) as necessary. Waste disposal of condensate in accordance with environmental requirements/regulations.
10. Electrical earthing of all equipment as requested and advised by Electrical engineer.
11. Insulation of warm air ducting and pipes in accordance with the spec.
12. Cable adjusters/anchors for pipes and channels over the roof as necessary.
13. Roof works for fresh air, exhaust air and smoke ducting.
14. Any changes required by the buyer or the local authority in any respect or form will be at the buyers expense
After Installation: The Buyer only if applicable with the purchase or the product.
1. The Buyer will provide heating fuel for commissioning.
2. Making compressed air available.
3. All power hook up by certified personnel.
4. If necessary, inspection and certification from the proper authorities.

 

Video Footage

Reviews (1)

1 review for Truck Spray Booth 12m Side Draft

There are no reviews yet.

Be the first to review “Truck Spray Booth 12m Side Draft”

Your email address will not be published.

Quality
Price
Service

Enquiry

Name
Email
Suburb
City
Phone
Enquiry

In Case You Missed it.............

Spray Booths & Car Lifts Suppliers